home *** CD-ROM | disk | FTP | other *** search
- Path: ns.ftns.no!news
- From: kenneth@norconnect.no (Kenneth C. Nilsen)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: MultiFaceCard3 trouble...
- Date: 12 Feb 1996 12:12:33 GMT
- Organization: A poorly-installed InterNetNews site
- Message-ID: <1237.6615T746T1695@norconnect.no>
- References: <4fd125$77n@mo6.rc.tudelft.nl>
- NNTP-Posting-Host: norconnect.no
- X-Newsreader: THOR 2.22 (Amiga;TCP/IP)
-
- >I try to access to duart.device, the Amiga locks up -- nu Guru's, no
- >messages, no funny screens, nothing. The parallel port works prefectly, so
-
- >Also, my manual says a jumper should be present on the circuit board. And it
- >should be left alone. However, on my rev. 3, there is no such thing! Only
- >the two soldering points, and they have not been connected... Could this be
- >the source of all evil? :)
-
- I,m sure that jumper is correct.
-
- >Another thing. Is the MFC3 as sensitive to static electricity as the standard
- >serial and parallel ports? Or rather, do they have sensitive things like the
- >CIA?
-
- I think the MFC III card is very sensitive. I have had two breakdowns on the
- card (and many thanx must go to Datakompaniet ans. where I bought it to help
- me out) and there has been no obviously explination to it. If your card don't
- work you should send it back to your retailer and ask for a replacement.
-
- Btw: The card don't use CIA.
-
- How did you install the software? Have you the MFC file in the Sys:Expansion
- drawer?
-
-
- ---
- CREATIVE LINKS __ Kenneth C. Nilsen
- http://www.norconnect.no/~kenneth /_/\ e-mail: kenneth@norconnect.no
- "Everything you want" \_\/ Software & MultiMedia developer
-
-